The Operator Control Console top includes the following switches:
| SWITCH | LOCATION | FUNCTION |
|---|---|---|
| Main Power Switch | Top Left | Turns the Operator Control Console on and off. |
| ROV Power Switch | Center Left | Turns the ROV power on and off. Twist in the direction of the arrows to turn on the ROV power and press the switch to turn it off. |
| LIM Module | Central Right | Test and Reset buttons can be found on the LIM. |
The Operator Control Console top includes the following connections:
| CONNECTION | LOCATION | FUNCTION |
|---|---|---|
| Power (100-240 Volts AC, 50, 60 Hz) | IEC male | Used to connect the Operator Control Console to a power source. |
The Operator Control Console side includes the following switches:
| SWITCH | LOCATION | FUNCTION |
|---|---|---|
| 12 VDC Circuit Breaker | Bottom Left | USed to protect the 12 V DC power for topside accessories. |
The Operator Control Console side includes the following connections:
| CONNECTION | TYPE | FUNCTION |
|---|---|---|
| Tether Whip (Specifications) | 8 pin round female | Used to connect the Operator Control Console to the tether for ROV power, communications, video and accessory support. |
| Monitor Power and Touch Screen Connection | Provides 12 Volts DC. Used to provide power and touch screen function to the monitor. | |
| Monitor Signal | HDMI, female (2) | Used to provide the video signal to the monitor. |
| USB Ports (7) | Type A female | Can be used to connect USB devices to the computer via the Operator Control Console. @ are dedicated to the keyboard and hand controller. 5 additional are available for other devices. |
| Ethernet | RJ-45 female | Can be used to connect the Operator Control Console to the computer for Ethernet based ROV accessories. |
| 12 VDC | DC Type M female (2) | Can be used to to provide 12 V DC power to topside accessories. |
Contact Support